BZHJS - DUNCAN 20018
- MSDS: BZHJS
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: DUNCAN 20018
- National Stock Number: 8010-00F048695
Product Identification
Product ID:DUNCAN 20018
MSDS Date:05/01/1995
FSC:8010
NIIN:00F048695
MSDS Number: BZHJS
Responsible Party
FRESNO, CA 93727-7819
US
Emergency Phone: 303-623-4884/209-445-1222
Info Phone: 209-291-4444
Preparer: SCOTT MATTISON
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
CRYSTALLINE-QUARTZ SILICA, SILICA DUST (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <8%
OSHA PEL 10 MG/CUM %RESP SIO2
ACGIH TLV: 0.1 MG/CUM RESP DUST
COBALT OXIDE
CAS: 1307-96-6
RTECS: GG2800000
Fraction By Weight: <1%
OSHA PEL 0.1 MG/CUM
ACGIH TLV: 0.1 MG/CUM
LEAD OXIDE YELLOW, LEAD OXIDE *96-2*
CAS: 1317-36-8
RTECS: OG1750000
Fraction By Weight: <29%
ACGIH TLV: 0.15 MG/CUM
ALKALI BOROSILICATE FRITS *96-2*
CAS: 65997-18-4
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE TO LEAD MAY CAUSE NERVOUS
SYSTEM, KIDNEY/BONE MARROW DAMAGE/HARM TO THE DEVELOPING FETUS.
SKIN: OVEREXPOSURE MAY PRODUCE ALLERGIC REACTION. INHALATION: MAY
CAUSE LUNG DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:WEIGHT LOSS, STOMACH CRAMPS, LOSS OF
COORDINATION, JOINT & MUSCLE PAIN, RASH, SHORTNESS OF BREATH.
Medical Cond Aggravated by Exposure:ABRASIVE, CAN SCRATCH EYES, DRY
SKIN/RASH.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WILL NOT BURN.
Accidental Release
Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & A WET
SPONGE.
Handling
Handling and Storage Precautions:KEEP SEALED. WHEN USING, DON'T EAT,
DRINK/SMOKE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID USING IF
PREGNANT/CONTEMPLATING PREGNANCY.
Exposure Controls
Respiratory Protection:USE A NIOSH APPROVED DUST & MIST RESPIRATOR FOR
LEAD SUCH AS 3M 8710/EQUIVALENT.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING. SPECIAL: USE RESPIRATOR WHEN SPRAYING.
Protective Gloves:NO
Eye Protection:RECOMMENDED
Other Protective Equipment:PROTECTIVE CLOTHING, USE SPRAY BOOTH &
RESPIRATOR. CLEAN SPRAY BOOTH FILTERS OFTEN.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:1800F
Spec Gravity:1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED LIQUID ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.